Author Topic: What Amiga based Project(s) are you currently working on? (Read 57069 times)

kritikal · « **on:** October 24, 2019, 11:31:59 am »

A Forum starter to get discussion growing...

What are you currently spending time on?

Personally I am going down the path of Replacing CD32 SMD electrolytic capacitor's, at an early stage so far.

ARB Forum Admin · « **Reply #1 on:** October 24, 2019, 12:00:35 pm »

Great start Thank you!

My current project is this Forum!

quantum8 · « **Reply #2 on:** October 24, 2019, 08:29:43 pm »

I'm updating my 3000 to 3.1.4.1 on my scsi2sd. Just put a new battery holder in.

Next up I need to find some GALs to replace the PALs...it's rather toasty there at the moment. Not good in this Brisbane heat!

intangybles · « **Reply #3 on:** October 25, 2019, 04:11:57 pm »

Currently no specific projects on the go (outside of the forum).

But I did recently post the following to FB group, thought I would publish it here!

https://www.amigaretro.com/index.php/topic,22.0.html

matt020 · « **Reply #4 on:** October 25, 2019, 11:06:51 pm »

I have a spare A2000 motherboard that has corroded pins on pretty much every socket, so I am slowly removing each socket.
It's painful.

intangybles · « **Reply #5 on:** October 26, 2019, 05:10:03 pm »

I don't envy you! I am ever pleased my A2000 was stored well all those years ago! It's not that I mind the restoration work it just finding the time that's hard!

dextereous · « **Reply #6 on:** October 28, 2019, 10:25:18 pm »

Lots of projects on the go, but most I'm just waiting for bits and pieces to arrive. I do finish things, eventually. i swear!

A500-8MB-FastRAM and A500-14MHz-Accelerator projects by this guy - https://github.com/kr239/. I'm hoping they'll work in the a2000, but if not, they'll go in my a500s.

ReAmiga 1200. Have all connectors and major ICs, so just need to order passives. I'll kick that one off in around a fortnight (I have the BoM ready to order from Mouser - just need to wrap the bills up first.

A500PlusPlus board ordered. Have some old A500 boards and a few spares laying around, so will mostly just have to order passives for this one. I have a black a500 case ordered in the indigogo campaign, so think it will look spectacular with the purple board.

A2000 6.x replica board by Paul Rezendes ordered. Longer term project that I expect to do early in the new year.

And depending on whether FPGA counts as Amiga (it seems Vampire certainly does!), I've almost completed my MiSTer build. Just waiting for some resistor arrays to arrive from RS components (expected Wednesday) and I can finish the I/O board. I've built 5 of the mini SDRAM boards (all tested stable at 130MHz), an RTC board and a USB hub board. This is an exciting project. I've been testing Minimig on a TC64v2 and it's flawless.

I'll post up pics as I complete them.

quantum8 · « **Reply #7 on:** October 29, 2019, 09:12:32 am »

Quote from: dejavu4u2 on October 28, 2019, 10:25:18 pm

ReAmiga 1200. Have all connectors and major ICs, so just need to order passives. I'll kick that one off in around a fortnight (I have the BoM ready to order from Mouser - just need to wrap the bills up first.

Now that's something I'd like to do one day.

Where did you source the major ICs from?

intangybles · « **Reply #8 on:** October 29, 2019, 01:43:23 pm »

Quote from: dejavu4u2 on October 28, 2019, 10:25:18 pm

And depending on whether FPGA counts as Amiga (it seems Vampire certainly does!), I've almost completed my MiSTer build. Just waiting for some resistor arrays to arrive from RS components (expected Wednesday) and I can finish the I/O board. I've built 5 of the mini SDRAM boards (all tested stable at 130MHz), an RTC board and a USB hub board. This is an exciting project. I've been testing Minimig on a TC64v2 and it's flawless.

Super interesting in this one too! I thought the "MiSTer / Minimig" was dead?

dextereous · « **Reply #9 on:** October 29, 2019, 11:40:25 pm »

Quote from: quantum8 on October 29, 2019, 09:12:32 am

Quote from: dejavu4u2 on October 28, 2019, 10:25:18 pm
ReAmiga 1200. Have all connectors and major ICs, so just need to order passives. I'll kick that one off in around a fortnight (I have the BoM ready to order from Mouser - just need to wrap the bills up first.

Now that's something I'd like to do one day.

Where did you source the major ICs from?

I picked up a spare board some time ago. Managed to repair it so know everything is working, but acquired it solely for the reamiga project so that's where it's gonna end up!

dextereous · « **Reply #10 on:** October 29, 2019, 11:49:54 pm »

Quote from: intangybles on October 29, 2019, 01:43:23 pm

Quote from: dejavu4u2 on October 28, 2019, 10:25:18 pm

And depending on whether FPGA counts as Amiga (it seems Vampire certainly does!), I've almost completed my MiSTer build. Just waiting for some resistor arrays to arrive from RS components (expected Wednesday) and I can finish the I/O board. I've built 5 of the mini SDRAM boards (all tested stable at 130MHz), an RTC board and a USB hub board. This is an exciting project. I've been testing Minimig on a TC64v2 and it's flawless.

Super interesting in this one too! I thought the "MiSTer / Minimig" was dead?

Not at all. I don't think the MiST hardware gets much love these days, but the MiSTer is still under very active development, as is Minimig. There seems to be new cores coming to both projects regularly.

intangybles · « **Reply #11 on:** October 31, 2019, 01:59:46 pm »

Quote from: dejavu4u2 on October 29, 2019, 11:49:54 pm

Quote from: intangybles on October 29, 2019, 01:43:23 pm
Quote from: dejavu4u2 on October 28, 2019, 10:25:18 pm

And depending on whether FPGA counts as Amiga (it seems Vampire certainly does!), I've almost completed my MiSTer build. Just waiting for some resistor arrays to arrive from RS components (expected Wednesday) and I can finish the I/O board. I've built 5 of the mini SDRAM boards (all tested stable at 130MHz), an RTC board and a USB hub board. This is an exciting project. I've been testing Minimig on a TC64v2 and it's flawless.

Super interesting in this one too! I thought the "MiSTer / Minimig" was dead?

Not at all. I don't think the MiST hardware gets much love these days, but the MiSTer is still under very active development, as is Minimig. There seems to be new cores coming to both projects regularly.

You wouldn't be able to post a couple of links perhaps? I got totally lost when I had a search!

Thank you!

P.S. perhaps you could post that in the projects section?

steve · « **Reply #12 on:** November 01, 2019, 08:21:21 am »

Fixing up and fixed an A2000 Motherboard...I was getting fuzzy screen then found a hairline crack close to the 23 pin video out...now time to test all my Zorro cards ...mainly ram/HDD add-ons

So hopefully today....will have a real Amiga day

ps: will skip the GYM

sweet lazy life (sll)

Gazzmaniac · « **Reply #13 on:** November 01, 2019, 05:57:12 pm »

Nice work on the 2000 Steve, glad it wasn't too difficult in the end!
As I said the other night, the hardest thing to do is find the motivation to pull the board out and bring it to the soldering bench

BTW my current project is getting the SMD500 running

dextereous · « **Reply #14 on:** November 01, 2019, 09:20:25 pm »

Quote from: intangybles on October 31, 2019, 01:59:46 pm

Quote from: dejavu4u2 on October 29, 2019, 11:49:54 pm
Not at all. I don't think the MiST hardware gets much love these days, but the MiSTer is still under very active development, as is Minimig. There seems to be new cores coming to both projects regularly.

You wouldn't be able to post a couple of links perhaps? I got totally lost when I had a search!

Thank you!

P.S. perhaps you could post that in the projects section?

For sure. I'll coble something together over the weekend. Bit of a showcase with relevant links and tips perhaps.

ARB Articles

Shoutbox

Author Topic: What Amiga based Project(s) are you currently working on? (Read 57069 times)

Recent Topics